| Specifications | |
| ECG | |
| Lead type | 3-lead or 5-lead selectable |
| Lead selection, 3-lead | I, II, III |
| Lead selection, 5-lead | I, II, III, aVR, aVL, aVF, V |
| HR measurement | Adult / pediatric: 15 bpm – 300 bpm Neonatal: 15 bpm – 300 bpm Step: 1 bpm |
| HR accuracy | ±5 bpm or ±1 %, whichever is greater |
| Arrhythmia | 21 calls |
| ST measurement range | -2.5 mV – +2.5 mV |
| Waveform speed | 6.25 mm/s,12.5 mm/s, 25 mm/s, 50 mm/s |
| Gain selection | x 1/4, x 1/2, x 1, x 2, x 4, Auto |
| Pacemaker detection | Yes |
| Protection | Against electrosurgical interference and defibrillation |
| Non-invasive blood pressure (NBP) | |
| Method | Automatic oscillometric |
| Parameters | SYS/DIA/MAP/Pulse Rate |
| Operating mode | Manual/Auto/STAT |
| Auto measure intervals | 3, 5, 10, 15, 30, 60, 90, 120, 240, 480 minutes |
| Units | mmHg/kPa |
| Cuff pressure range, adult / pediatric | 0 – 300 mmHg ( 0 kPa – 40.0 kPa) |
| Cuff pressure range, neonate | 0 – 150 mmHg ( 0 kPa – 20.0 kPa) |
| Systolic measurement range, adult/ pediatric | 30 mmHg – 254 mmHg (4.0 kPa – 33.9 kPa) |
| Systolic measurement range, neonate | 30 mmHg – 135 mmHg (4.0 kPa – 18.0 kPa) |
| Diastolic measurement range, adult / pediatric | 10 mmHg – 220 mmHg (1.3 kPa – 29.3 kPa) |
| Diastolic measurement range, neonate | 10 mmHg – 110 mmHg (1.3 kPa – 14.7 kPa) |
| MAP measurement range, adult / pediatric | 20 mmHg – 235 mmHg (2.7 kPa – 31.3 kPa) |
| MAP measurement range, neonate | 20 mmHg – 125mmHg (2.7 kPa – 16.7kPa) |
| Accuracy, maximum standard deviation | 8 mmHg (1.1 kPa) |
| Accuracy, mean error | ±5 mmHg (±0.7 kPa) |
| Pulse rate range | 40 bpm – 240 bpm |
| Pulse rate accuracy | ±5bpm or ±5%, whichever is greater |
| SpO2 (Philips SpO2 technology) | |
| Measurement range | 0 – 100 % |
| Accuracy | 70 % – 100 %, depends on sensor; 0 – 69 %, unspecified |
| Waveform speed | 6.25 mm/s, 12.5 mm/s, 25 mm/s, 50 mm/s |
| Pulse rate range | 30 bpm – 300 bpm |
| Pulse rate accuracy | ±2 bpm or ±2%, whichever is greater |
| Perfusion index | Yes |
| Respiration (RESP) | |
| Measurement method | Thoracic impedance |
| Measurement range | 0 rpm – 150 rpm |
| Accuracy | 0rpm – 120rpm: ±1 rpm; 121rpm – 150rpm: ±2 rpm |
| Waveform speed | 6.25 mm/s,12.5 mm/s, 25 mm/s, 50 mm/s Accuracy undefined |
| Gain selection | x 1/2, x 1, x 2 |
| Apnea alarm | Yes, 10 – 60 s |
| Work mode | Auto or manual (threshold) |
| RESP lead | RA-LL |
| Temperature (TEMP, 2-channel) | |
| Measurement range | 0 – 50℃ (32℉ – 122℉) |
| Resolution | 0.1℃ (0.2℉) |
| Accuracy | ±0.1℃ (±0.2℉) (without sensor) |
| Units | ℃ / ℉ |
| Minimum measuring time | Attachable skin surface probe: less than 10 minutes Esophageal/rectal probe: less than 2 minutes |
| Capnopgraphy (etCO2, optional) | |
| Method | Microstream, infrared absorption (Oridion) |
| Parameters | awRR, etCO₂, inCO₂ |
| Measurement range | 0 – 99 mmHg (0 kPa – 13.2 kPa) |
| Accuracy+C781, 0 – 38 mmHg (0 kPa – 5.1 kPa) | ±2 mmHg (±0.28 kPa) |
| Accuracy, 39 mmHg – 99 mmHg (5.2 kPa – 13.2 kPa) | ± (5% of reading + 0.08% for every 1 mmHg (0.13 kPa) above 38 mmHg (5.1kPa) |
| awRR range | 0-150 rpm |
| awRR accuracy, 3 rpm – 70 rpm | ±1 rpm |
| awRR accuracy, 71 rpm – 120 rpm | ±2 rpm |
| awRR accuracy, 121 rpm – 150 rpm | ±3 rpm |
| Invasive Blood Pressure | |
| Accuracy | ±4 mmHg (0.53 kPa) or ±4 % of reading, whichever is greater |
| Invasive blood pressure (IBP, 2-channel, optional) | |
| Parameters | SYS/DIA/MAP/Pulse Rate |
| Measurement range | -50 – 400 mmHg (-6.6 kPa – 53.3 kPa) |
| Waveform speed | 6.25 mm/s, 12.5 mm/s, 25 mm/s, 50 mm/s |
| Resolution | 1 mmHg (0.13 kPa) |
| Units | mmHg/kPa/cmH₂O |
| Transducer sensitivity | 5 uV/V/mmHg |
| Pulse rate range | 30 bpm – 254 bpm |
| Pulse rate accuracy | ±2bpm or ±2%, whichever is greater |
| Sampling rate | 62.5 samples per second |
| Recorder (optional) | |
| Type | Built-in thermal recorder, 3 channels |
| Print mode | Real-time recording, timed recording, alarm-activated recording |
| Print speed | Auto, 12.5 mm/s, 25 mm/s, 50 mm/s |
| Display | |
| Type | Color TFT LCD, 4:3 |
| Size | 10.4+611:631″ |
| Resolution | 800 x 600 pixels |
| Channels | Max 11 channels (auto waveform channel height adjustment) |
| Power supply | |
| AC power input | 100 – 240 VAC, 50/60 Hz |
| Battery | Rechargeable Li-Ion battery Maximum 2.5 hour continuous monitoring (1 battery) |
| Weight and dimensions | |
| Net weight | Approx. 3.5 kg without battery |
| Dimensions (w x d x h) | 316 mm x 265 mm x 131 mm (12.5 in. x 10.5 in. x 5.2 in.) |
| Safety approval and quality system | |
| Safety standard | IEC 60601-1-2:2014 |
| Electromagnetic environment | IEC 60601-1-2:2000/A1:2014 |
| Quality system | ISO9001 & ISO13485 certified CE marking according to the Council Directive 93/42/EEC |
| Water proof | IPX1 |
| Data review and storage | |
| Data review and storage | 1600- NBP data, 1200 hr trend graph, 120 min full disclosure ECG 1, 200 – alarm & arrhythmia events |
| External interface (standard) | |
| External interface | ECG analog output VGA output Nurse call LAN USB |
| Cardiac Output (optional) | |
| Measurement method | Right heart thermodilution |
| Measurement range | 0.1 l/min – 20.0 l/min |
| Measurement accuracy | ±0.2 l/min or ±10 %, whichever is greater |
| Blood temperature range | 27℃ – 43℃ (80.6℉ – 109.4℉) |
| Blood temperature accuracy | ± 0.1℃ |
| Injection temperature | 0℃ – 27℃ (32℉ – 80.6℉) |
| Name | Air Purifier |
| Model | AC2887 |
| Brand | Philips |
| Air quality sensor(s) | Aerasense PM2.5 sensor |
| Color of the control panel | Black |
| Fan speed indicators | Silent, Speed 1, 2, 3, Turbo |
| The material of the main body | Plastic |
| Color(s) | White |
| CADR (formaldehyde) | 200 m³/h |
| Filters out PM2.5 | in one hour, >99 % |
| Filters out viruses | in 0.5 hr, 99.9 % |
| CADR (cigarette smoke) | 333 m³/h |
| Room size | 25-79 m² |
| Cord length | 1.6 m |
| Effective area | 24~41 m² |
| Frequency | 50/60 Hz |
| Power | 11~60 W |
| Sound level | 20.5-51 dB(A) |
| Voltage | 220 V |
| Stand-by power consumption | <0.5 W |
| Dimensions of packaging (LxWxH) | 412 x 294 x 612 mm |
| Dimensions of the product (LxWxH) | 359 x 240 x 558 mm |
| Weight incl. packaging | 9.3 kg |
| Weight of product | 7.7 kg |
| Color | White |
| Wattage | 60W |
| Frequency | 50Hz |
| Voltage | 220 -240V |
| Bacteria filters | > 99.9% |
| Cord length | 2.3 m |
| Specification | |
| Front cover | white |
| Materials of the main body | ABS plastic |
| Country of origin | china |
| Product sizes | 435 x 280 x 615 mm |
| Product weight | 5,35 kg |
| Tension | 220-240v |
| Wattage | 30 W |
| Air quality sensor | particulate matter |
| Bacteria filter | : > 99.9% |
| Specification | |
| Brand | PHILIPS |
| Model | Digitrak XT |
| ECG | 5 Lead, 3 Channel |
| Sample Rate | 175/sec |
| Event Switch | Press Enter |
| Frequency Response | 0.05Hz to 60Hz, @-3dB |
| Pacemaker Detection | Available |
| Recording Time | Up to 96 Hours |
| Weight with Battery | 70 g |
| Operating Temperature | 0°C to +45°C/32°F to 113°F |
| Waterproof | Yes |
| Product Name | Ecg Paper |
| Material | Medical Grade Thermal Paper |
| Brand | Phillips |
| Size | 210*300*200 |
| Type | Z Fold |
| Specification | |
| Brand | PHILIPS |
| Model | Efficia CM12 |
| Display Size | 12″ LCD |
| Resolution | 1280 x 800 |
| Basic Parameter | ECG, SPO2, NIBP |
| Temperature Range | 0–40°C (32–104°F) |
| Humidity Range | 15–95% Relative Humidity |
| Ingress Protection | IP21 |
| Power Consumption | < 75 Watts. |
| Weight | < 5.0 kg (11.0 lb). |
| Indicator | Alarm, ON, Error, External Power & Battery |
| USB 2.0 & RS232 | Available |
| ETCO2 | Optional |
| IBP | Optional |
| Cardiac Output (CO) | Optional |
| Specification | |
| Brand | PHILIPS |
| Model | Efficia DFM100 |
| Mode | Biphasic Truncated Exponential |
| Charge Time | < 6 seconds |
| Patient Impedance Range | Min. 25 ohm |
| Delivered Energy Accuracy | ±10% or ±1J whichever is greater |
| AED Mode | 150 Joules for Adult & 50 J for Infant/Child |
| ECG | 5 Lead |
| Display | 7 Inch LCD |
| Resolution | 800 x 480 pixels |
| Weight | 5.66 Kg |
| Report Print | Auto |
| SPO2 Range | 0-100% |
| Temperature | 0 °C to 45°C |
| Humidity | Up to 95% |
| Power | 220 V 50 Hz |
| Specification | |
| Brand | PHILIPS |
| Model | IntelliVue MX 430 |
| Country of Origin | Germany |
| Display Size | 12″ LCD |
| Resolution | 1280 x 800 |
| Basic Parameter | ECG, SPO2, NIBP |
| Temperature Range | 0–40°C (32–104°F) |
| Humidity Range | 15–95% Relative Humidity |
| Ingress Protection | IP21 |
| Power Consumption | <70 W average |
| Weight | 6.6 kg (14.6 lb) |
| Indicator | Alarm, ON, Error, External Power & Battery |
| USB 2.0 & RS232 | Available |
| ETCO2 | Optional |
| IBP | Optional |
| Cardiac Output (CO) | Optional |
| Specification | |
| Brand | PHILIPS |
| Model | PageWriter TC20 |
| Warranty | 1 Year |
| Display | 6.5″ Touch Screen |
| Resolution | 640×480 |
| Printing Resolution | 200×500 dpi |
| Printing Paper Size | A4 |
| Algorithm | DXL ECG |
| Interpretive Statement | More Than 600 |
| Graphical ST Presentation | Available |
| Weight | 8.6 Kg Including Battery |
| Product Name | Full Face Mask |
| Brand | Philips |
| Usage/Application | Hospital |
| Size | Small, Medium, Large |
| Material | Silicone |
| Color | Transparent |
| Storage Temperature | -20 to 60 Degree C |
| Minimum Order Quantity | 1 Piece |
| Product Name | Respironics Bipap Machine |
| Brand | Philips |
| Modes | AVAPS-AE mode |
| Usage/Application | Hospital |
| Model Name/Number | A40 |
| Ventilation modes | CPAP, S, S/T, PC, T, AVAPS-AE, |
| Target tidal volume | 200 – 1500 ML |
| Breath rate | 0 – 40 bpm |
| Rise time | 1(100ms) – 6 (600ms) |
| Humidification | System One humidity control and ‘Dry Box’ technology |
| Hybrid ventilation | AVAPS (Average Volume Assured Pressure Support) |
| AVAPS rate | 0.5 to 5 cm H2O/min |
| Inspiratory time | 0.5 to 3 sec |
| Alarms | Patient disconnection, apnea, low minute ventilation, low tidal volume, high respiratory rate |
| Monitoring | Pressure, tidal volume, minute ventilation, respiration rate, leak |
| Filters | Foam and optional ultra-fine |
| Data Management | EncorePro 2 and DirectView software Compatible with oximetry module, Advanced detection of residual respiratory events (Apnea/Hypopnea Index, Obstructed Airway Apnea, Clear Airway Apnea, Hypopnea, Periodic Breathing, RERA, Large Leak and Snore) |
| DC power source | 12VDC, 5.0 A |
| External battery | 24VDC, 4.2 A |
| Battery backup | 11 hours at IPAP 15 / EPAP 4 cm H2O and 12 BPM |
| Noise level | 30 dBa AT 10 cm water |
| IPAP | 4-40cm H2O |
| EPAP | 4-25 cm H2O |
| Battery backup | 9hrs |
| Warranty | 1 Years |
| Product Name | Nebulizer Compressor System |
| Brand | Philips |
| Noise Level | 58 +/-3 dBA |
| AC Voltage | 220V/230 V |
| Compressor Max Pressure | 296 kPa-317 kPa |
| Average Flow Rate | 6 lpm to 7 lpm |
| Max Flow Rate | 8.0 lpm to 9.3 lpm |
| Thermal Overload Protector | Thermal Fuse; Functioning Temperature 150 Degree C |
| Weight | 1.5 kg |
| Dimensions | 165 x 165 x 108 mm (L x W x H) |
| Product Name | Philips Respironics Ventilator |
| Model | Trilogy 100 |
| Brand | Philips |
| Environmental | |
| Temperature | 5°C – 40°C |
| Relative humidity | 15% – 95% |
| Atmospheric pressure | 110 kPa to 60 kPa |
| Physical | |
| Weight | 11 lbs, 5 kgs |
| Size | 6.6″L x 11.2″W x 9.3″H (16.68 cm L x 28.45 cm W x 23.52 cm H) |
| Controls | |
| Circuit types | Active with PAP, passive |
| Ventilation types | Volume control, pressure control, bilevel |
| Volume modes | AC, SIMV (w/PS), CV |
| Pressure modes | CPAP, S, S/T, T, PC-SIMV (w/PS) |
| IPAP | 4 – 50 cm H20 |
| EPAP | 0 – 25 cm H20 for active circuits |
| 4 – 25 cm H20 for passive circuits | |
| CPAP | 4 – 20 cm H20 for passive circuits |
| PEEP | 0 – 25 cm H20 for active circuits |
| 4 – 25 cm H20 for passive circuits | |
| Pressure support differential | 0 – 30 cm H20 |
| Measured patient parameters | |
| Tidal volume | 50 – 2000 ml |
| Breath rate | 0 – 60 for AC mode |
| 1 – 60 for all other modes | |
| Inspiratory time | 0.3 – 5.0 secs |
| Rise time | 1 – 6 |
| Ramp start pressure | 0 – 25 cm H20 for active circuits |
| 4 – 25 cm H20 for passive circuits | |
| 4 – 19 cm H20 in CPAP mode | |
| Ramp length | Off, 5 – 45 minutes |
| Flex | Off, 1 – 3 |
| Flow trigger sensitivity | 1 – 9 l/min |
| Flow cycle | 10% – 40% |
| Apnea rate | 4 – 60 BPM |
| Tidal volume | 0 – 2000 ml |
| Minute ventilation | 0 – 99 l/min |
| Leak rate | 0 – 200 l/min |
| Respiratory rate | 0 – 80 BPM |
| Peak inspiratory flow | 0 – 200 l/min |
| Peak inspiratory pressure | 0 – 99 cm H20 |
| Mean airway pressure | 0 – 99 cm H20 |
| Percentage patient triggered breaths | 0 – 100% |
| 9.9:1 to 1:9.9 | |
| Alarms | |
| Circuit disconnect | Off, 10 – 60 secs |
| Apnea | Off, 10 – 60 secs |
| High tidal volume | Off, 50 – 2000 ml |
| Low tidal volume | Off, 50 – 2000 ml |
| High minute ventilation | Off, 1 – 99 l/min |
| Low minute ventilation | Off, 1 – 99 l/min |
| High respiratory rate | Off, 4 – 80 BPM |
| Low respiratory rate | Off, 4 – 80 BPM |
| Product Name | Nasal CPAP Mask |
| MANUFACTURER | Philips Respironics |
| IN THE PACKAGE | TrueBlue Nasal CPAP & BiPAP Mask with Adjustable Headgear |
| PART NUMBER | (S)1071800 (Petite), 1071801 (Small), 1071803 (Medium), 1071804 (MediumWide), 1071805 (Large) |
| HCPCS CODE | A7034 A7035 |
| GTIN / UPC CODE | 00606959004368, 00606959004375, 00606959004382, 00606959004399, 00606959004405 |
| COUNTRY | United States of America (Typical Origin) |
| AVAILABLE SIZE (S) | Petite, Small, Medium, Medium Wide, Large |
| MATERIALS | Not Made with Natural Rubber Latex |
| TYPE | Nasal Cushion Mask |
| PRESSURE LEVELS | 3-30 CM H2O (Recommended) |
Folee Oxygen Concentrator 10 Litre Price in BD
