BIOHEMERS Rapid Test Pocket Portable HbA1C Analyzer Meter for Blood Group Testing
Features
Fast:
No calibration required; Test results within 5 minutes; No preheating needed before testing
Precise:
Accurate results with CV 3%; NGSP and IFCC double certificates; CE certified
Results displayed as:
% HbA1c (DCCT – preset) or mmol/mol (IFCC); Additional display of eAG in mmol/L
Accessories:
4 AAA Batteries, User manual, Operation guide, Cleaning, and maintenance guide.
The Non-slip Design Let You Easy to Hold
In addition to the accuracy of blood glucose measurement, we hope to let you use more easily through good design.
Specifications
Test strip
GS300
Coding
Smart code key calibration
Enzyme / Measurement technology
GOD / Electrochemical sensor
Blood sample source
Capillary whole blood
Minimum sample volume
1.4 microliters (0.0014c.c.)
HCT range
30 – 55%
Measuring range
10 – 600mg/dL (0.6 – 33.3 mmol/L)
Meter dimensions (L x W x H)
85.0 x 58.0 x 22.0 mm (3.34 x 2.28 x 0.86 inch)
Display area (L x W)
39.0 x 38.0 mm (1.53 x 1.49 inch)
Weight (with battery)
85g
Power supply
Two 1.5V AAA batteries
Memory capacity
300 blood glucose test results with date and time
Operating temperature
10 – 40°C (50 – 104°F)
Operating relative humidity
10 – 90%
Meter storage conditions
-10 – 60°C (14 – 140°F)
Test strip storage conditions
4 – 30°C (39 – 86°F), < 90% relative humidity
Accuracy
95% of the measured glucose values shall fall within either
Glucose concentrations < 5.5mmol/L (100mg/dL), difference within ± 0.83mmol/L (15mg/dL)
Glucose concentrations ≥ 5.5mmol/L (100mg/dL), bias within ± 15%
This cuff can only be used with Beurer blood pressure monitor model BM19 and BM35
The cuff should be a good fit for your upper arm or wrist circumference.
Before the measurement makes sure you sit and relax in a quiet place for at least five minutes.
Place the bottom edge of the cuff approximately two fingers above the crook of the arm and wrap it around the arm so the closure sits on the outside and the inflatable part sits on your inner arm, toward the chest.
When the cuff is closed you should still be able to fit a finger between your skin and the cuff.
NOTE: Does not include any blood pressure monitor. Only the XL cuff.
This cuff can only be used with Beurer blood pressure monitor model BM19 and BM35
The cuff should be a good fit for your upper arm or wrist circumference.
Before the measurement makes sure you sit and relax in a quiet place for at least five minutes.
Place the bottom edge of the cuff approximately two fingers above the crook of the arm and wrap it around the arm so the closure sits on the outside and the inflatable part sits on your inner arm, toward the chest.
When the cuff is closed you should still be able to fit a finger between your skin and the cuff.
NOTE: Does not include any blood pressure monitor. Only the XL cuff.
BC 19 Talking Wrist Blood Pressure Monitor, Beurer, Germany
Specifications
Non-invasive oscillometric blood pressure monitor for the wrist
Range: 0-300 mm Hg
Pulse: 40-180 beats / minute
Precision: systolic & diastolic + /- 3 mmHg ; pulse + /- 5 percent
Memory: 2 x 60 memory places
Dimensions: 85 x 70 x 31 mm
Weight: approximately 140 g
Circumference for the wrist of approximately 140 x 195 mm
Operating temperature: + 5 ? C to 40 ? C, 40-80 percent RH
Power supply: 2 x 1.5 mm
Warranty : 3 Years replacement Guaranty
Remember to use your left arm lying down or sitting when measuring your blood pressure on a wrist blood pressure monitor. An important factor to remember is to place your left arm at an angle to align the blood pressure monitor cuff with your heart level.
৳ 280.00
৳ 17,500.00